Solar Road Stud Light HT-RS-SA2

Power Supply:

2.5V/120mA

Battery:

1.2V/600mAh NI-Mh battery

LED:

6pcs super brightness Φ5mm LEDs

Working Mode:

Flashing or Steady

Visual Range:

more than 800meters

Compress Resistance:

>30T

solar road studs are ground lamps, used to mark potential danger zones in road traffic. Compared to passive reflectors, solar collectors are active in the dark (LED techn-ology), which increases the visibility and marking effect up to 1000 meters. This makes it possible to efficiently mark neuralgic areas such as pedestrian strips, traffic islands, curves, round abouts, etc. The solar road studs is suitable to drive over. It is designed to install flat into the road surface, there is no danger for two-wheelers. Maintenance machines such as snow plows, sweepers etc. are also not hindered.

1、USA brand sunpower flexible solar panel high conversion and charge efficiency ,Compression resistant and not easy to damage;2、Program PCB has high stability;3、Embedded reflector design, not easy to fall off, good waterproof performance;4、Anchor holes or adhesive bond for dual fixation ;5、High-temperature resistance battery and circuit,can be used on the equator.

productsled solar road stud flashing light outdoor solar cat eye road stud solar marker light
materialaluminium alloy
size122*104*23mm
Solar panel2.5V/120MA monocrystalline silicon, High conversion solar panel
Battery1.2v 600mAH Ni-MH battery
LED coloryellow,red,blue,white etc
Visual rangemore than 800meters
Operating Temperature-20℃~+80℃
Operating TimeMore than 200hours for flashing model,72 hours for steady
Compression strength30 tons
Life Timeover 3 years

Solar road stud light are packed by box,2pc/box,30 boxes per carton,we can also packed the road stud as your request,such as by pallet

1. Mark the proper position for the road studs.
2. Clean road with a brush, to make the surface of road smooth, clean and dry.
3. Put glue on the bottom evenly. Keep it in the right direction and press it into the road tightly
4. Check within 2 hours of installation to ensure that all studs are not installed incorrectly and are not bent or deformed due to compression
5. After 4 hours of installation, the glue will dry completely.
6. It can also be fixed on both sides with bolts.

WISTRON is committed to providing high quality solar spike, road cones, speed bumps and other road traffic safety protection products, which are favored by customers around the world. We have 16 years of factory and have a professional R & D team, to provide you with one-stop service, support customization and offline factory inspection. WISTRON only do high quality solar spike, our timely delivery, service quality. Welcome your consultation!

  • Q:Could I get samples ?
  • A: Yes, of course, low value samples are free, and for our customers who have worked with, not only free samples but also free freight.
  • Q: Do you have MOQ:
  • A: No MOQ, we can also accept OEM and ODM
  • Q: Do you offer warranty?
  • A: Solar products guarantee time is 1-2 years, common products life time are according to the working environment
  • Q:What’s the price?
  • A: As you know, different quantity different price, the bottom price are based on the quantity, delivery time and payment method.
  • Q: How can I make order?
  • A: Firstly, you need contact with us,then talk about the details, everything is OK, we will make proforma invoice ,then you can pay for by T/T/West Union/ by Alibaba.
  • Q: How can I get the cargo?
  • A: If samples order, we can delivery by air, such as DHL, UPS, FedEx etc, if more, delivery by sea, by air, by train, we can also supply door to door service

Leave Your Message