Solar Road Studs, also known as ground-embedded lights, offer a straightforward installation process for enhancing road safety. Follow these steps for correct installation:
1.Site Preparation:
Clear the installation site, ensuring a clean and level surface. Remove any debris or obstructions to facilitate seamless installation.
2.Marking Positions:
Mark the positions where the Solar Road Studs will be installed. Use markers or chalk lines to ensure precise placement along lanes, intersections, or pedestrian areas.
3.Drilling Holes:
Utilize a drill to create holes at the marked positions. The hole size should match the dimensions of the Solar Road Studs, allowing for a secure and snug fit.
4.Insertion of Studs:
Gently insert the Solar Road Studs into the drilled holes. Ensure a firm fit to prevent displacement over time, especially considering factors like vehicular traffic.
5.Sealing the Perimeter:
Apply a sealant or epoxy around the perimeter of the installed Solar Road Studs. This creates a weather-resistant seal, preventing water ingress and enhancing the durability of the installation.
6.Testing and Activation:
Before completing the installation, conduct a test to ensure each Solar Road Stud is functioning correctly. Activate the studs and verify that the LEDs illuminate as intended.
7.Backfilling:
Once the testing is successful, backfill the drilled holes with soil or a suitable filling material. Ensure the backfilling is compacted to secure the studs in place.
8.Final Inspection:
Perform a final inspection to confirm that all Solar Road Studs are securely installed, aligned, and functional. Address any issues promptly to guarantee optimal performance.
9.Maintenance Guidelines:
Provide users with maintenance guidelines, emphasizing periodic checks for debris, ensuring the solar panel is clean, and verifying the integrity of the sealant.
By adhering to these installation steps, you can effectively deploy Solar Road Studs to enhance road safety. Their simple installation process, coupled with durability and sustainable energy use, makes them an efficient solution for guiding and safeguarding road users.
The above are some descriotions of the functiona features of the Solar Road Studs . If you are nterested in this system or have needs, you can log on to our website https://www.wistronchina.com/ to check your product needs,or send an email To Cathy: [email protected] to lear more, we look forward to cooperating with you.In addition, if you are interested in the product, you can also learn more through the following ways!
Youtube: https://lnkd.in/gcDg4Hzc
Facebook：https://lnkd.in/gfErA3Ck
Linkedin：https://lnkd.in/giK5-D6s
WhatsApp: https://wa.me/ 008615001021506