PRODUCTS
IL300 Solar Road Stud Lights HT-RS-IL300
Power Supply: | 4.5V/140mAh monocrystalline silicon, High conversion solar panel |
---|---|
Battery: | 3.2V/1200mAh Lithium battery |
LED: | Epistar brand led, 6pcs 10mm super bright LED |
Working Mode: | Flashing(120times/min) or Steady |
Life Span: | 5-8 years with battery |
Compress Resistance: | over 80 tons |
The IL300 solar road stud is new . Adopt Embedded type, not easy to crush, does not affect snow removal in winter .
The IL300 solar road stud is new. Adopt Embedded type, not easy to crush, does not affect snow removal in winter . Solar road studs convert the light energy of sunlight into electricity for LED. Solar panels absorb sunlight during the day ,and if it is cloudy,it will not be affected,and will continue to absorb light energy and store it in lithium batteries. The electricity stored in the lithium batteries at night is automatically converted into light energy and emitted through the diode. Whether it is rainy or snowy ,it will automatically light up to remind the driving driver to poss. Nowadays solar road stud are being installed in many place,is so vary wide,which can be installed in highways,tunnel entrances , parks and other places.The pressure resistance of solar road stud is more than 80 tons.
1.Embedded type, not easy to crush, does not affect snow removal in winter 2.Epistar led, high brightness 3.Control by light 4.Charge by sunlight 5.Various color 6.Lithium battery long duration 7.IP68 waterproof 8.Load-bearing>80Ton 9.VISIBLE DISTANCE>1000M 10.High conversion solar panel 11.Long life span 12.Robot soldering 13.Anti-theft stainless steel screw
>> Detailed production process
IL300 solar spike surface is cast aluminum material, material full, strong stability; > Embedded type, not easy to crush, does not affect snow removal in winter; > This solar spike is very popular in the Philippines, we have 16 years of factory production experience, specializing in providing quality road safety protection products to customers around the world.
>> Installation process
1. Drill a hole Dia 144mm and 50mm deep. 2. Clean the hole of debris. 3. Pour 200g glue (Epoxy resin adhesive,1:1 ratio of AB adhesive) into the hole. 4. Place the solar road stud in the hole and press firmly. 5. The Epoxy resin should fully set after 8 hours.
>> Application scenario
>> certificate
Our company has complete certificates of products. Products have related waterproof certificate, anti – pressure certificate. If you need us to produce the specified certificate, we can also handle it.
>> FAQ :
- Q:Could I get samples ?
- A: Yes, of course, low value samples are free, and for our customers who have worked with, not only free samples but also free freight.
- Q: Do you have MOQ:
- A: No MOQ, we can also accept OEM and ODM
- Q: Do you offer warranty?
- A: Solar products guarantee time is 1-2 years, common products life time are according to the working environment
- Q:What’s the price?
- A: As you know, different quantity different price, the bottom price are based on the quantity, delivery time and payment method.
- Q: How can I make order?
- A: Firstly, you need contact with us,then talk about the details, everything is OK, we will make proforma invoice ,then you can pay for by T/T/West Union/ by Alibaba.
- Q: How can I get the cargo?
- A: If samples order, we can delivery by air, such as DHL, UPS, FedEx etc, if more, delivery by sea, by air, by train, we can also supply door to door service