PRODUCTS
G105 Solar Road Studs HT-RS-SG5
| Power supply: | Solar Panel2.5V/160mA for Ni-Mh battery,5V/80mAh for Lithium battery |
|---|---|
| Battery: | 1.2V/1300mAh、1.2V/1500mAh for NI-Mh battery or 3.2V/1000mAh Lithium battery |
| LED colors: | White Green Red Yellow Blue |
| Water proof: | IP68 |
| Compress Resistance | ＞70T |
Solar Road Stud also know as cat eyes,can help to reduce accident at regional rail crossing, intersection and provide guidance and hazard warning to drivers in darkness and bad weathers. The solar system of solar powered marker lights is conducive for reducing environmental impact and saving costs. With more than 15 years of factory experience, led road reflectors produced by our company owns competitive price and offers more choice to global traffic road safety market and trustworthy partners all over the world.The base of this solar road stud is made of cast aluminum, and the surface is made of plastic spraying technology.The shell is made of reinforced PC material, which has excellent impact resistance and heat stability. Loading capacity more than 30 tons, can be used in the middle of road.This solar studs is very popular in Philippines. WISTRON has been exported more than 80,000 pcs solar pavement markars to PH.
>>Our solar road stud advantage with others
2.Rubber mat make solar road stud have more impact resistant
3.Our screw is stainless, won’t rust and also anti-theft,and also can change the solar road stud wick.
4.OEM LOGO and design
5.ours has lamp holder, visual area is more bigger
>> Working Principle of Solar Road Stud Light
During the day, solar panels absorb sunlight and convert solar energy into electrical energy, which is stored in energy storage devices (batteries or capacitors). At night, the electrical energy in the energy storage devices is automatically converted into light energy (controlled by photoelectric switches) and emitted by LEDs. Bright light outlines the road and induces the driver’s sight. Solar road studs will starts automatically to flash when night falls or with the onset of inclement weather .The bright flashing LEDs are highly effective at getting the attention of drivers much earlier than conventional road studs.The base of this solar road stud is made of cast aluminum, and the surface is made of plastic spraying technology.The product has a rubber bottom pad to increase the service lifeThe shell is made of reinforced PC material, which has excellent impact resistance and heat stability.Loading capacity more than 70 tons, can be used in the middle of road.This solar studs is very popular in Philippines.Following is the video how to manufactuer the solar road stud HT-RS-SG5.
>> Solar Road Stud Installation Step
To install Solar Road Studs safely, it is of utmost importance to secure the workers and the street safely!
1. Mark the proper position for the solar road studs.
2. Clean road with a brush, to make the surface of road smooth, clean and dry.
3. Drilling a hole with a drilling machine (drilling bit 125mm) and clean the hole
4. Pour some glue in the hole and Put glue on the solar road stud bottom evenly, lastly put the solar road stud to the hole
5. Check within 2 hours of installation to ensure that all studs are not installed incorrectly and are not bent or deformed due to compression
6. After 4 hours of installation, the glue will dry completely.
7. Remove the installation isolation facility within 6-8 hours after the installation of the solar road studs.
This type solar road stud is basically parallel to the road surface after installation, reducing the impact force of the vehicle on the road stud, safer, more compression resistant and longer lifetime
>> Application scenario
Apply market：Philippines, South Korea, USA, France, Belgium, Singapore, Azerbaijan, Indonesia, South Africa, Russia
>> certificate
>> FAQ :
- Q：Could I get samples ?
- A: Yes, of course, low value samples are free, and for our customers who have worked with, not only free samples but also free freight.
- Q: Do you have MOQ:
- A: No MOQ, we can also accept OEM and ODM
- Q: Do you offer warranty?
- A: Solar products guarantee time is 1-2 years, common products life time are according to the working environment
- Q：What’s the price?
- A: As you know, different quantity different price, the bottom price are based on the quantity, delivery time and payment method.
- Q: How can I make order?
- A: Firstly, you need contact with us,then talk about the details, everything is OK, we will make proforma invoice ,then you can pay for by T/T/West Union/ by Alibaba.
- Q: How can I get the cargo?
- A: If samples order, we can delivery by air, such as DHL, UPS, FedEx etc, if more, delivery by sea, by air, by train, we can also supply door to door service
